HOTEL and RESORT

View 156

Top 10 Bench Vises 2016

Each home DIY-ers looking for a tabletop model and contractors needing a sturdier unit will locate the correct alternative for his or her subsequent project from our comprehensive selection of bench vises. Capable of assisting up to 220 pounds and rotating up to 360 degrees, these amazing grippers will make sure a secure and solid hold on almost any workpiece.

Palmgren Comb. Bench & pipe vise, 6-InchYost Vises FSV-6 6-Inch Heavy-Duty Forged Steel Bench Vise with 360-Degree Swivel BaseIRWIN Tools Mechanics Vise, 6-Inch (4935506)Rockwell RW9207 Vise Extension Jaw for RK9006TEKTON 54004 4-Inch Swivel Bench ViseWilton 63302 6-Inch Shop ViseShop Fox D4074 5-Inch Multi Purpose Bench ViseHFS (TM) Brand 5-Inch Heavyduty Bench Vise Anvil Forged.360 Swivel Locking Base Desktop Clamp (16LBS) , HFS Blue DesignSE 8436MVC 3-Inch Universal Table ViseOlympia Tools 38-736 Hobby Woodworker's Vise, 6-Inches

What To Do With A Bench Vise

If you run a construction company or wood-working shop, you likely worry constantly about your employee's safety. Workers in these environments face risks like hearing loss, head trauma, and life-threatening cuts. A bench vise can at least reduce the risk of the latter. This tool holds a workpiece, like a board of wood or sheet of metal, stationary while a person does things like sawing, drilling or boring it. As the tool's name implies, it usually attaches to a work bench, and typically sits flush with the work surface. The amount of force many power tools apply to a workpiece can be so powerful, that a human hand alone cannot hold it in place.

Anyone who has a workshop of any kind will find that a bench vise has plenty of uses. If you are completing a project in which the pieces must be held together by glue, a bench vise can hold them in place while the glue dries properly. Cutting into lumber with an electric chainsaw is much easier when the wood is held in place by a bench vise, and it will ensure the straightest edges. A bench vise is also essential when doing any sort of drilling, especially if you need your holes to be precise in their location and size.

There is no question that anyone who cuts materials for commercial use cannot afford to be without a bench vise. In many applications, precision cuts are necessary. Making an improper cut time and again can become costly very quickly. One may have to start all over again with a brand new workpiece. If working with expensive materials, this can add up to hundreds of dollars on a single job. Bench vises reduce the chances of making improper cuts, not only saving money but time too.

What To Look For In A Bench Vise


Go to top.

If you need to clamp onto large pieces of wood, look for a quality metal dog in your vise. Square dogs tend to provide the greatest grip. Vises with countersunk holes are the easiest to attach to a work bench, as are those made from a lightweight material like aluminum. Just make sure the rods stay tight so your vise doesn't move while you're working as contact with equipment is one of the top causes of injuries on construction sites.

If you work with delicate materials, or simply want a finished product that has very little markings on it, consider a bench vise with rubber covering on its clamps. This will reduce the amount of scuffs and scratches on your materials. Depending on your needs, you may either want a small, portable bench vise, or you may need a heavy duty, more permanent one. Some can assert thousands of pounds of pressure and have impressive tensile strength so they will not break under extreme tension. The heftier vises have double lockdowns to ensure they stay in place under the most strenuous jobs. Just make sure, especially with the heavier vices, that the u-channel glides easily.

If you work with materials that create very little surface friction, like metal, make sure your vise clamps have non-slip markings to grip onto them. This will look slightly like the tread on the bottom of a boot. Those who work outdoors or in humid climates should look for a bench vise with powder coating to prevent rusting, which can happen to materials one wouldn't even expect, like stainless steel.

The History Of The Bench Vise


Go to top.

It's a mystery who invented the very first form of the bench vise, but before it came to be, workers would simply clamp items together through the use of a wedge and hammer. The first version of the bench vise came about in the middle ages and used clamps with threads. These held workpieces vertically, though, and would tend to tilt. The year 1750 saw the creation of the parallel vice. On this tool, the jaws moved on adjustable horizontal slots, which held materials in place much better than the previous model. But it is most likely that the first patents for such a tool didn't exist until the early 1900s.

The English began making cast iron vises in 1830, but because air bubbles would form during the pouring of the liquid iron, these models could be quite frail. Many of them would break if one applied to much tension, so they were useless for heavy duty jobs. This ushered in the need for vases made from forged steel.

In 1925, German inventor Josef Heuer created the drop-forge vise, with its innovative dual-prism guide track. Brockhaus Heuer is still one of the leading manufacturers of bench vises. With their first vise, the Heuer Prism, seeing much success, the company's team set to work creating a new vise to piggyback on the popularity of their first one. And so came to be the Heuer Front, a vise that opened in the front, towards the worker.


#10.Olympia Tools 38-736 Hobby Woodworker's Vise, 6-Inches


Mount the OLYMPIA TOOLS 6 in. Hobby Woodworker'S Vise to the face of your bench and gets a sure grip on your furniture, cabinetry and other woodworking and assembly projects.Made from 30,000 PSI cast iron, durability and dependability are built in. Jaw travel is guided by twin steel rails, evenly distributing contact between jaw and workpiece, to maximize grip and prevent surface damage. Installation options include positioning flush with bench top, for quick and consistent alignment between workpieces.


Price, Info, & Pic.



Go to top.






#9.SE 8436MVC 3-Inch Universal Table Vise


SE is very proud to bring you this 3" Universal Table Vise, featuring a rotation of 360 degrees and a tilt of 45 degrees. This aluminum table vise is designed to be lightweight yet durable enough to tackle the toughest of projects. The width of the vise jaws is 3 inches and span open for a length of 2 inches. These jaws are padded with rubber soles to comfortably secure your item in the vise.


Price, Info, & Pic.

Go to top.




#8.HFS (TM) Brand 5-Inch Heavyduty Bench Vise Anvil Forged.360 Swivel Locking Base Desktop Clamp (16LBS) , HFS Blue Design


The first vise I received was defective and customer service quickly sent a replacement. The new vise works perfect, I would highly recommend for light duty applications. This vise won't hold up to the beating of a 5-pound sledge but it works for small jobs and doesn't take up a bunch of room on the bench.


Price, Info, & Pic.



Go to top.






#7.Shop Fox D4074 5-Inch Multi Purpose Bench Vise


This multi-purpose vise does it all. Jaws rotate 360 degrees for unlimited workpiece positioning and hold flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and there's even an anvil face to top it all off. Weighs 50 lbs.


Price, Info, & Pic.

Go to top.




#6.Wilton 63302 6-Inch Shop Vise


"JET/WILTON(WALTER MEIER)" GENERAL DUTY SHOP VISE 6" Jaw Width General Duty Shop Vise 6" Jaw Opening 3-1/2" Throat Depth Features Instant Action Engagement 360 Degrees Swivel Base, Double Lock Downs & Point Base Mounting 25,000 PSI Casting Strength Rubber Pinch Point Safety Guards Precision Machined Cast U-Channel Slide Bar Replaceable Serrated Top Jaws


Price, Info, & Pic.



Go to top.






#5.TEKTON 54004 4-Inch Swivel Bench Vise


The all-purpose medium duty TEKTON 4 in. Swivel Bench Vise is the benchtop work horse your garage or shop can't live without. Whether you are repairing vehicles, metalworking, or assembling parts, you can work better, faster and safer knowing it is properly secured. Just lock it in and thread, fasten, build, bend, shape, or sharpen it with confidence. Performance Made from 30,000 PSI cast iron, durability and dependability are built in. Put your project in the sure grip of the replaceable non-slip serrated steel jaws and it won't budge. For forming and shaping metal pieces, the polished anvil offers a smooth, consistent work surface. Design Rotate the vise around its 120-degree swivel base and you can position your work in just the right spot. Once there, dual lock-down nuts keep it in place. Turn the sliding T-bar handle and the jaw glides smoothly along the Acme threaded main screw without binding or chattering, even as clamping pressure increases.


Price, Info, & Pic.

Go to top.




#4.Rockwell RW9207 Vise Extension Jaw for RK9006


The RW9207 extended jaw accessory helps fine tune your clamping or holding projects to accommodate larger pieces. The RW9207 is an extended jaw that stretches the Benchjaws capacity from 16-Inch to 24-Inch allowing for the possibility of clamping certain cabinetry and larger projects for sanding, finishing, painting, and constructing.


Price, Info, & Pic.



Go to top.






#3.IRWIN Tools Mechanics Vise, 6-Inch (4935506)


6-inch jaw width. 3-inch throat depth. Fused steel handle makes adjusting a cinch. Swivel base allows for 120-degree rotation. Incorporated anvil keeps vise steady while you work. IRWIN Tools Mechanics Vise, 6-Inch (4935506)


Price, Info, & Pic.

Go to top.




#2.Yost Vises FSV-6 6-Inch Heavy-Duty Forged Steel Bench Vise with 360-Degree Swivel Base


The Yost Forged Steel Bench Vise is a Heavy duty, Bench Vise. Constructed out of 75,000 PSI Forged Steel this Vise is meant for metal fabrication and other Heavy duty applications. The Vise features a 360 degree Swivel Base with two lockdowns.


Price, Info, & Pic.



Go to top.






#1.Palmgren Comb. Bench & pipe vise, 6-Inch


Industrial strength 6" Bench Vise by Palmgren. This 6" Vise in a combination of bench and pipe style for the most versatility. Palmgren manufacturers vises with a unique straight-line pull system which removes all wear from the spindle and nut. This pull system allows Palmgren to guarantee this vise for a lifetime. Vise manufactured with 65,000 PSI ductile castings. The vise is completely sealed and does not allow any contaminants or debris to disrupt the smooth motion. Replaceable serrated steel jaws and replaceable pipe jaws. Precision fit slide bar to 0.003". 360 degree swivel base with dual lock downs and again, Guaranteed for life.


Price, Info, & Pic.

Go to top.


Thanks for reading the fine print. regarding this Design-Crafts.com: we do not settle for sponsorships, free goods, "samples" or different edges from any of the merchandise brands featured on this page. This freelance ranking may be a work of opinion, supported a careful analysis of the wants of the standard shopper, balanced against the worth proposition of every item reviewed. This Our Studio! may be a participant in associate programs from amazon, walmart, ebay, and target, and will earn advertising fees after you use our links to those websites. however don't fret, as a result of these fees won't increase your price, which can be constant as any direct visitant to the merchant's web site. If you suspect that your product ought to be enclosed during this review, you may contact us, but we cannot guarantee a response, even if you send us flowers.