If you're ready to take your ideas and designs from paper or CAD file to the next level, the Monoprice MAKER SELECT 3D Printer is the perfect starter solution for your needs! Unlike kit-based printers, which require a certain level of knowledge, experience, and time to assemble, the MAKER SELECT 3D Printer is assembled using only 6 screws and includes everything you need to begin printing right out of the box. With the ability to print any type of 3D filament and a price point lower than most DIY kits, this entry-level 3D printer is the easiest and least expensive way to join the 3D printing revolution! Includes 2GB micro SD card preloaded with printable 3D models out of the box Includes sample PLA filament so you can print right out of the box Heated build plate allows for high-reliability printing of slow cooling materials, such as ABS Can use compatible software, such as Cure, Repeater, or Simplify 3D Expanded user's manual with detailed, easy-to-follow assembly and usage instructions Tighten just 6 screws and be printing in 10 minutes Choose to give the innovative and creative gift of learning.
Definitely loving it, ZERO config to start printing, no need to calibrate anything, it worked right out of the box. I didn't even need to install drivers on Windows 10 Pro 64 bit. It comes with a CD-ROM which contains the software used to send your 3D drawings to the printer. You can also download it from their website. As soon as I connected it found a new firmware, downloaded it and installed it.
Moderate noise, it is not quiet, and I was not expecting so, the amount of noise does not bother me, but at night I do close the door from. I'm sure some people will complain about the noise level, in my opinion, is normal.
This is really a solid printer. The kit came with everything you need to assemble it, all in organized packaging, and an instruction manual that had detailed steps to assemble every part of it (If you can read, look at pictures, and use a wrench, you can put this together). Calibration is easy, especially if you followed the instructions in the build process, and I had it printing an hour after assembling it. So far, I've only printed in ABS and PLA, so I'll update the review as I go. I printed as low as 50 microns, but that was just playing around and it looked really good. As far as print quality, it's really on the user 100%. There's no factory defect to blame things on, so you need to set it up right from the start, which, fortunately, is easy to do. Easier in some ways than Lego kits.
The Robo C2 is the next-next generation of fully-featured 3D printers from Robo 3D. Featuring a compact size, it has one of the fastest print speeds in the 3D consumer space with 300 mm per second and one of the largest build volumes in its category. With a built-in touch screen as well as WiFi and mobile connectivity it is fully compatible with Robo's new print app, so you can 3D print right from any iOS device. The Robo C2 printer brings a high-quality, easy-to-use solution to consumers. The Robo C2 is one of the smallest and most portable of 3D printers in the market, focused on users that want a smaller and more compact offering. While it may be compact, it still boasts the same printing speed as its larger siblings and a minute resolution of up to 20 microns for smooth and highly detailed prints.
UP mini 2 is not only affordable, reliable and easy-to-use like the first generation UP mini, it also comes with many new features related to usability, portability, and connectivity.
The UP mini 2 is for people who want to start 3D printing in no time. A new sleek design packed with killer features, a versatile machine suitable for anyone, anywhere. Continue to be UP’s best value offer for desktop 3D printing, the UP mini 2 inherited all the good stuff of UP mini 1, including a low price point, easy to use and exceptional reliability. The print quality of UP mini 2 is a big leap, thanks to the new mechanical design and the capability to print in 0.15mm layers.
I've been following 3D printing for a while now but I have always been on the fence for a few reasons:
1. Assembly - most problems I see from new printers is from the quality of assembly, either from a kit or poor manufacturing. The Lulzbot Mini was superbly assembled and I experienced no problem from the very first print.
2. Openness - A lot of the well-manufactured printers are closed source, Lulzbot Mini isn't.
3. Features - To get a heated bed and some sort of auto-leveling you needed to pay a lot of money, the Mini is relatively inexpensive.
This is my first printer. When I saw this one, I was totally attracted by its beautiful appearance. The black color is so classic and it has 4 doors to open, making it very easy to use and clean. Now I just put it in my studio to work for me with no worry about the noise, it is quiet. After a night’s work, my designs finished. I really enjoy finding the amazing prints in every morning. I need to set the parameters ahead in STL file, then the print precision is high. Now I print something easy, but I will challenge the complex ones in following days.
This is my first 3D printer, and it was pretty easy to set up and has been great to use and learn with. The onboard camera helps me keep an eye on the prints in case I input incorrect settings, and I can even pause or abort prints across the wifi network!
I had been waiting for the right 3D printer to come out that made more complex or even impossible prints possible because of dual extrusion and the water soluble filament. The wait is over, this printer can do it all!
I'll start out by saying that I am only an amateur when it comes to 3D printing. I had no real prior knowledge about it but knew that it was something that I wanted to get into. The Creator Pro by FlashForge has been really great in the few months I've had it. If you're new to 3D printing, prepare yourself to be frustrated, in the best way possible. Trust me, though. If you're passionate about this, it is extremely rewarding once you familiarize yourself with everything.
This is an amazing printer for the price. The simplicity and rigidity of the design allow this printer to produce accurate prints and do so repeatedly. I've run this machine non-stop for weeks without a single hiccup. I was pleased upon receiving my M2 to find all steel and aluminum construction, a sturdy power supply, a rugged and easy to disassemble hot end, and the guys at MG were even kind enough to include a sucker in the kit. Was a nice touch. It is rare to find a machine that just does what it is supposed to do, without any unnecessary bells and whistles.
Thanks for reading the fine print. regarding this Design-Crafts.com: we do not settle for sponsorships, free goods, "samples" or different edges from any of the merchandise brands featured on this page. This freelance ranking may be a work of opinion, supported a careful analysis of the wants of the standard shopper, balanced against the worth proposition of every item reviewed. This Our Studio! may be a participant in associate programs from amazon, walmart, ebay, and target, and will earn advertising fees after you use our links to those websites. however don't fret, as a result of these fees won't increase your price, which can be constant as any direct visitant to the merchant's web site. If you suspect that your product ought to be enclosed during this review, you may contact us, but we cannot guarantee a response, even if you send us flowers.