Tools

View 138

Top 10 Siding Nailers 2017

Built for contractors or keen DIY-ers, and differing from roofing nailers specifically within the ammunition they use, those siding nailers are specifically designed to make sure your construction work meets inspection requirements, particularly if you stay in a vicinity with high/hurricane-force winds.

Makita AN611 1-1/4-Inch to 2-1/2-Inch Coil Siding NailerFreeman PCN65 Coil Siding Fencing NailerHitachi NV75AN 1-3/4 Inch to 3-Inch Coil Siding / Framing NailerBOSTITCH N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Aluminum HousingHitachi NV65AH2 Coil Siding Nailer, 2-1/2-InchMax CN565S3 Supersider Siding Coil Nailer3 PRO HCN57PA Siding Coil Nailer, .081-.098 Diameter 1-2.25-Inch Long 12x5x12-Inch, Black/RedDEWALT DW66C-1 2-1/2 Inch 15 Degree Coil Siding and Fencing NailerOuya CN55R 13-Gauge 1-Inch to 2-1/4-Inch Pneumatic Coil Siding Nailer KitWEN 61782 3/4-Inch to 1-3/4-Inch Pneumatic Coil Roofing Nailer


#10.WEN 61782 3/4-Inch to 1-3/4-Inch Pneumatic Coil Roofing Nailer


Remember when you could re-roof your roof? Nail shingles, insulation boards, waterproof tar paper, fiber cement roofing, siding, vinyl and more with the WEN Pneumatic Coil Roofing Nailer. The versatile magazine holds up to 120 nails at a time, allowing for sizes of 11-gauge (.12 inches) nails ranging from 3/4 of an inch all the way up to 1-3/4 of an inch. Adjust the depth of the fired nails by turning the depth-setting wheel found on the head of the nailer. Clear jammed nails with the quick-release compartment on the side of the magazine.


Price, Info, & Pic.eBay



Go to top.






#9.Ouya CN55R 13-Gauge 1-Inch to 2-1/4-Inch Pneumatic Coil Siding Nailer Kit


The only thing I did not like was that I had to replace the air connection. But aside from that, I used it for siding and it worked just fine for me.


Price, Info, & Pic.eBay

Go to top.




#8.DEWALT DW66C-1 2-1/2 Inch 15 Degree Coil Siding and Fencing Nailer


As with most Dewalt products, this nailer meets and exceeds my expectations. The adjustable depth gauge works well and is easily adjusted. The product does not come with a fitting for an airport, however, I would not remove a star for this because most people have a preference to the type of quick connect that they are going to use anyhow. I have gone through multiple coils of nails already while fixing a previous install of Hardiboard that was not installed up to par.


Price, Info, & Pic.eBay



Go to top.






#7.3 PRO HCN57PA Siding Coil Nailer, .081-.098 Diameter 1-2.25-Inch Long 12x5x12-Inch, Black/Red


Rated at 1 million cycles, 3 PRO products are built to meet the most demanding standards. The 3 PRO HCN57PA, Coil Siding Nailer will provide superior performance throughout the extended life of this tool.


Price, Info, & Pic.eBay

Go to top.




#6.Max CN565S3 Supersider Siding Coil Nailer


The Max CN565S3 siding nailer has a slim guide contact arm and features an anti-double fire mechanism. It also has a maintenance free end cap filter and easy twist adjustable deflector.


Price, Info, & Pic.eBay



Go to top.






#5.Hitachi NV65AH2 Coil Siding Nailer, 2-1/2-Inch


The Hitachi NV65AH2 2-1/2" coil siding nailer brings power, precision, and convenience to the job site and weighs only 4.8 lbs. Capable of driving nails as large as 2-1/2" x .099" at a rate of 3 per second, the NV65AH2 is both powerful and efficient. With newly added features like a selective actuation switch, side load, tilt bottom magazine and repositioned depth of drive adjustment dial, the professionally preferred siding nailer gets even better.


Price, Info, & Pic.eBay

Go to top.




#4.BOSTITCH N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Aluminum Housing


Nail down siding in no time with the powerful, precise Bostitch N66C-1 Coil Siding Nailer. This lightweight tool features an aluminum housing that makes it durable enough to repeatedly withstand the rigors of all-day use. And with adjustable nail depth and a soft rubber foot, you can work with a range of siding materials, including softwoods. The N66C-1 Siding Nailer works with an air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.


Price, Info, & Pic.eBay



Go to top.






#3.Hitachi NV75AN 1-3/4 Inch to 3-Inch Coil Siding / Framing Nailer


The NV75AN coil siding/framing nailer brings power, precision, and convenience to the job site. Capable of driving nails as large as 3" x .131" at a rate of 3 per second, the NV75AN is both powerful and efficient. The side load magazine and open nose design offer convenience, while the plastic shield offers safety, deflecting wire collation away from the user. It comes standard with a contact (bump) trigger installed on the tool and an optional sequential trigger in the box.


Price, Info, & Pic.eBay

Go to top.




#2.Freeman PCN65 Coil Siding Fencing Nailer


This gun worked flawlessly. The double tap problem that a lot of people commented on is normal and I could reproduce it with my brothers Bostitch. Misfires yes there were a few maybe 20 or 30 over the course of 3 cases of nails. once the depth was set I never had to touch it through the whole job. My brother is a contractor of 25 years and was helping me reside my house with T1-11 and I was able to keep up with him nail for nail.


Price, Info, & Pic.eBay



Go to top.






#1.Makita AN611 1-1/4-Inch to 2-1/2-Inch Coil Siding Nailer


The Makita 2-1/2 inch Siding Coil Nailer (model AN611) combines rugged construction with ease-of-use features for improved performance. The AN611 accepts 1-1/4 inch to 2-1/2 inch nails (.080 - .099 shank diameter) with a 300-400 magazine capacity and an easy-loading canister with nail size adjustment. The AN611 has a 3-mode selector switch (contact, sequential, lock) that is engineered for increased user control and convenience. Additional features include a 'tool-less' depth adjustment with 9 depth settings and sharp spurs that grip the wood for increased control at an angle.


Price, Info, & Pic.eBay

Go to top.


Thanks for reading the fine print. regarding this Design-Crafts.com: we do not settle for sponsorships, free goods, "samples" or different edges from any of the merchandise brands featured on this page. This freelance ranking may be a work of opinion, supported a careful analysis of the wants of the standard shopper, balanced against the worth proposition of every item reviewed. This Our Studio! may be a participant in associate programs from amazon, walmart, ebay, and target, and will earn advertising fees after you use our links to those websites. however don't fret, as a result of these fees won't increase your price, which can be constant as any direct visitant to the merchant's web site. If you suspect that your product ought to be enclosed during this review, you may contact us, but we cannot guarantee a response, even if you send us flowers.